PandaCoat UniBase MS Clear transparent waterproofing paste, 1 kg

Need to seal a crack or joint quickly and reliably?

PandaCoat UniBase MS Clear is a transparent, thick waterproofing paste based on MS polymer. It cures with atmospheric moisture into a strong, elastic, fully watertight membrane – without discolouration or visible marks.

Why UniBase MS Clear

Transparent waterproofing without traces
Forms a clear, almost invisible coating – ideal for surfaces where appearance matters.

Stops leaks fast
Effectively seals cracks, joints and seams, even on wet surfaces – suitable for emergency repairs.

Resistant to UV and temperature changes
Works outdoors and indoors – resists rain, standing water, sun, frost and heat.

Easy to use, no primer
Apply with a trowel directly to the clean surface – no primer or special tools needed.

Environmentally friendly
Solvent-free and isocyanate-free, odourless formula – safe to use indoors.

What it is

One-component, thick waterproofing paste based on MS polymer that cures with atmospheric moisture into a strong, elastic, fully watertight, transparent membrane. Ready to use – free of solvents and isocyanates.

Where to use

• Bathrooms, shower areas
• Kitchens and other damp rooms
• Window and door joints
• Roofs, gutters, chimney bases
• Aquariums
• Indoor and outdoor repairs, emergency sealing

Application

The surface must be free of loose particles, dust, oil etc.; remove old coatings. Apply UniBase MS Clear with a trowel in one coat.

Coverage: recommended minimum 1.5–1.8 kg/m².
Curing time: 12–24 h depending on conditions. Cured material can only be removed mechanically.